Lorry Loaders and Unloaders
Handling - Conveyors
Lorry Loaders and Unloaders
Merlin supplies a wide range of mobile vehicle loaders & telescopic boom Dock loaders to suit all types of applications.
Which a choice of 3 standard belt widths, and a varied combination of infeed and main boom lengths, the correct model can be defined for all applications. In addition, made to measure units can be manufactured to customers individual requirements.
Health and safety features common to all the range include finger guards, a mushroom headed stop button and a specially designed machine drum, smaller than the belt width, so that fingers cannot be trapped easily.Each model is rated to carry 100Kg per metre (67 lb per foot) with a maximum spread load of 350kg (770 lb). power is supplied by a fixed-speed 1/2HP single-phase 240V AC motor, controlled via Forward/Stop/Reverse controls located on the main chassis. Other options are available on request.
In vehicle loading applications an optional gravity expandable "tongue" accessory can be attached to the end of the main boom, giving access deep inside the vehicle. Other accessories available for this range include adjustable side guards, hydraulic infeed table lifts and electro-hydraulic controls.
Mobile Loaders
The standard range of Mobile Powered Loaders which includes 45 permutations -can be supplied with an epoxy resin finish or food grade belt for food handling applications.
Vehicle & Tongue
The Penetrator is a vehicle loader, which has a special telescopic belt allowing loading or unloading to take place with continual adjustment of penetration depth.
The Penetrator is designed to handle loads weighing as much as 5OKg per metre (331b per foot), on its 600mm (24") wide belt, and is normally supplied with a fixed speed single-phase 1 HP motor. The standard motor drives the belt at 21 metres (70') per minute and is designed to start under full load if needed. An optional variable-speed drive controller is also available.
Because of its compact design, the Penetrator can be moved and stored by one person, when not in use. This is made easy by the four 200mm (8") heavy- duty lockable nylon castors. The single- phase drive motor can be plugged into a normal 240VAC 13A socket.
The Maxi-Penetrator is a mobile vehicle loader, which incorporates a flexible telescopic continuous-belt system. Controls located at each end allow loading or unloading to be undertaken with continuous adjustment to penetration up to 10 metres inside the vehicle.
Dockloaders can be fixed or mobile and conform to stringent safety standards. Robust and reliable the Dockloaders will start fully loaded with controls & emergency stops at either end.
Benefits
- British made
- Conforms to stringent safety standards
- Controls/emergency stop at either end
- Made with Kaybe experience
- Will start under full load
- Fully counter balanced/cantilevered
- robust and reliable
- Fixed or mobile
- High level chassis
- Variable speed
- Motorised hydraulic height adjustment
- Manufactured in customers colours
- Droop snoot, ski jump, parcel counters, etc.
- Service/maintenance contracts
Please call 0845 124 9955 for the latest prices and information or use the Contact Us form if outside UK Office Hours
| Gravity Feed Conveyors< Prev | Next >Powered Conveyors |
|---|