Lockers
All Steel Tool cabinets and Lockers
ALL STEEL TOOL CABINETS AND LOCKERS
| Â | |||
| Heavy duty, fully welded construction available in the following types: | |||
| Â | |||
| BMA / BMB MODEL | BMD MODEL | ||
 | BMA PRICE: £98 |  | BMD PRICE: £120 |
| BMB PRICE: £86 |  | ||
| BMD cupboard with one shelf and single drawer above | |||
| Â | |||
| BMA single door Locker with two fixed shelves BMB As BMA without door | |||
 | Â | ||
| BMF MODEL | BMG MODEL | ||
 | BMF PRICE: £260 |  | BMG PRICE: £250 |
| Â | Â | ||
| BMF eight drawers with door | BMG as BMF without door | ||
| Â | Â | ||
| | ||
| BMH MODEL | BMH LIQUID STORAGE MODEL | ||
 | BMH PRICE: £205 |  | BMH LIQUID STORAGE PRICE: £235 |
| Â | Â | ||
| BMH Double locker with two fixed shelves. 915mm x 915mm x 457mm (36" x 36" x 18") | BMH Double locker also available as a liquid storage locker with sumps and painted yellow with hazard stickers | ||
| Â | | ||
Models BMA, BMB, BMD, BMF and BMG dimensions 915mm x 457mm x 457mm
Models BMA, BMD and BMF also available 610mm (24") high as fitted to Assembly Benches. All cupboards may be mounted on castors at an extra cost. | |||
Clean Room Lockers
Clean Room Lockers
KEEPING CLEAN
Keeping clean garments and soiled work overalls separate can often be a problem. The Clean and Dirty Locker solves this by providing a centre partition with a double coat hook to either side. Identical in overall size the Uniforms Locker has three handy shelves to one side of the partition.
CLEAN & DIRTY LOCKER
Complete with full width internal top shelf 305mm high, vertical centre partition and two double coat hooks.
- WIDTH 460mm
- DEPTH 460mm
- TOP COMPARTMENT HEIGHT 305mm
UNIFORMS LOCKER
Complete with full width internal top shelf 305mm high, vertical centre partition, double coat hook and a further three half width shelves.
- WIDTH 460mm
- DEPTH 460mm
- TOP COMPARTMENT HEIGHT 305mm
Please contact is with Quantities and Delivery area so that we can offer a competitive quotation.
Please call 0845 124 9955 for the latest prices and information or use the Contact Us form if outside UK Office Hours
Educational Lockers and Benches
Educational Lockers and Cloakroom Benches
Educational Lockers offer colour options for every level, from kindergarten to college. From a simple cube upwards, the sheer variety of lockers available puts them at the top of every school’s list for changing and storage requirements.
- Quality engineered to provide a sturdy and robust locker that will give many years of service.
- Built-in security features generate confidence that belongings will be kept safe.
- Replacement locks and keys are available if required. Numbered cards, for locker identification, available on request.
- Durable powder coated finish with colour options to suit your environment.
- The hard wearing anti-bacterial powder coating for an active environment as standard.
- Available with Trespa doors and slats
Please call 0845 124 9955 for the latest prices and information or use the Contact Us form if outside UK Office Hours
Locker Room Design Guidance
Locker Room Design Guidance
 |
| Guidance to Locker Room Design Important factors to consider |
| 1) | The size and configuration of the locker compartment will be determined by the items to be stored e.g. the need to hang garments,size of bags/holdalls,the storage of motor cycle helmets and footwear etc. |
| 2) | Is there a need to store workwear separately from personal clothing if so then PPE or Clean/Dirty locker options are available. |
| 3) | If hygiene is important consider a factory fitted sloping top option on lockers. This prevents an unwanted build up of dirt and debris and also encourages storage within the locker and not outside. locker stands can provide cleaning access to beneath the locker. |
| 4) | Check floor surfaces are level, lockers are designed to be floor standing. To overcome uneven floors locker stands are supplied with adjustable feet. |
| 5) | Will users be changing footwear?, it would be useful to offer freestanding benches or an integral seat and stand option. |
| 6) | Is there a need to air damp clothing?, then consider lockers where garments can be hanged or opt for a compartment locker with perforated holes in doors to increase air circulation. |
| 7) | Type of lock required - key camlock, padlock type fitting, £1 coin or token return lock options available. |
| 8) | Additional locker accessories e.g hanging rail, sloping top, number plates etc. |
| 9) | Is there a need for locker compartments to be visually monitored. Perforated doors allow inspection from outside the locker. |
| 10) | factors relating to the positioning and off-loading of lockers should be considered e.g. will labour be required. Neested lockers are more difficult to manoeuvre than single lockers. |
| 11) | Check if delivery vehicle access is sufficient. |
| 12) | Coloured door requirements. |
| General Info:- | Metal lockers are not intended for use in damp or wet areas. Under the Workplace ( Health, Safety and Welfare regulations 1992 ) employers are required to provide suitable and sufficient accommodation for workwear and personal clothing. The Personal Protective Equipment at work regulations 1992 also require the provision of suitable storage to protect personal protective equipment from damage, contamination or loss. |
Lockers and Personal Storage solutions
Lockers and Personal Storage solutions for the UK
Available in 7 to 10 days
Link To PDF on Laptop / Mobile Phone Lockers
Designer one piece lockers
For clean or dirty use, designer one piece lockers incorporate ventilation holes from top to bottom and are mounted on raised feet. Multi-compartment version available for clean use.
For clean or dirty use, designer one piece lockers incorporate ventilation holes from top to bottom and are mounted on raised feet. Multi-compartment version available for clean use.
D x H cm : 50 x 180. One piece sheet steel shells on raised feet in a light grey epoxy finish. Locks on each door. Designer doors in blue or light grey. Multiple perforations. All doors come complete with label holders. Available in 3 versions : clean use industrial lockers, dirty use industrial lockers or multi-compartment lockers.
Clean use industrial lockers Interior fittings: coat rail, upper storage shelf.
Dirty use industrial lockers Interior fittings: coat rail, central partition, upper and lower storage shelves.
 |
Standard one piece lockers
A classic range of clean or dirty use industrial lockers. Raised feet and hasp optional.
D x H cm : 50 x 180. One piece sheet steel shells in a light grey epoxy finish. Locks on each door. Standard doors in light grey. Upper and lower vents for air circulation. Available in 2 versions : clean use or dirty use.
Clean use industrial lockers Interior fittings: coat rail, upper storage shelf.
Â
 |
Self assembly lockers
Self assembly industrial lockers. Quick and easy to assemble – no nuts and bolts required.
D x H cm : 50 x 180. Quick and easy to assemble, no nuts and bolts required. Made from sheet steel in a light grey finish. Upper and lower vents for air circulation. Hasp attachment for padlock. Available in 2 versions : clean use industrial lockers or dirty use industrial lockers. 2 door colours to choose from : light grey (GR) or blue (BU). Adhesive label holder.
 |
Office lockers
Of one piece design, office lockers come in a choice of three colours to match the office furniture ranges.
W x D x H cm : 40 x 50 x 198. One piece sheet steel construction. Interior fittings : coat rail, shelf. Rear air vents (not visible from the front).
 |
Wardrobe units
160 cm and 120 cm tambour cupboards, complete with hanging space.
 |
Coat rail units
Mobile unit for self assembly. Will hold 20-25 hangers.
W x H cm : 146 x 160. Easy to assemble and dismantle. Made from chrome plated tubular steel, Ø 3 cm. Fitted with four swivel castors.
 |
Please click on the Adobe icon below to view the electronic catalogue on lockers or contact us for your free paper version.
More Articles...
Page 1 of 3
«StartPrev123NextEnd»Brochures Online
Online Shops
Online
Latest Blog News
| Information on the leading Industrial Products |
|